Installing

Login

Update

Configuring

How To

User Features

Security Issues

Documentation bullet Outbound

Documentation.Outbound History

Hide minor edits - Show changes to markup

February 24, 2012, at 05:42 PM by paulc - Link to international calls limits
Changed lines 145-146 from:

Freesentral protects your system against attackers trying to make expensive calls. The system counts the number of calls for the specified prefixes and if counters reach the specified limits, calls for those prefixes are disabled. By default all international calls are counted.

to:

Freesentral protects your system against attackers trying to make expensive calls. The system counts the number of calls for the specified prefixes and if counters reach the specified limits, calls for those prefixes are disabled. By default all international calls are counted.

Changed line 162 from:

You can disable all international/expensive calls by selecting "disable" in the "International Calls" dropdown. If any of the limits specified in Settings>>Limits international calls are reached then international calls will be disabled. In this case you will see a red box with 'International calls: off' and the reason and time when they were disabled on the home page.

to:

You can disable all international/expensive calls by selecting "disable" in the "International Calls" dropdown. If any of the limits specified in Settings>>Limits international calls are reached then international calls will be disabled. In this case you will see a red box with 'International calls: off' and the reason and time when they were disabled on the home page.

February 22, 2012, at 11:29 PM by monica -
Changed line 18 from:
to:
Changed lines 162-165 from:

You can disable all international/expensive calls by selecting "disable" in the "International Calls" dropdown. If any of the limits specified in Settings>>Limits international calls are reached then international calls will be disabled. In this case you will see a red box with 'International calls: off' and the reason and time when they were disabled on the home page. You can enable them again by either clicking on the 'Enable' link as seen in the image below or by connecting with telnet to yate and typing 'international on'.

to:

You can disable all international/expensive calls by selecting "disable" in the "International Calls" dropdown. If any of the limits specified in Settings>>Limits international calls are reached then international calls will be disabled. In this case you will see a red box with 'International calls: off' and the reason and time when they were disabled on the home page.

You can enable them again by either clicking on the 'Enable' link as seen in the image below or by connecting with telnet to yate and typing 'international on'.

February 22, 2012, at 11:28 PM by monica -
Changed lines 19-20 from:
to:
Changed lines 149-150 from:

You can disable all international/expensive calls by selecting "disable" in the "International Calls" dropdown. If any of the limits specified in Settings>>Limits international calls are reached then international calls will be disabled. In this case you will see a red box with 'International calls: off' and the reason and time when they were disabled on the home page.

to:

International prefixes

By default freesentral comes with '00' (Europe international prefix), '011'(US international prefix) and '+' (prefix for numbers in e164 format) as international prefixes. You can refine them and specify just certain expensive destinations and leave the other international prefixes uncounted.

Exception prefixes

Depending on the country you are located in, certain prefixes won't be counted as international even if they match the international ones. Define more refined prefixes for the exceptions for the national prefixes/international prefixes that are often used in your system.

ReEnable International Calls

You can disable all international/expensive calls by selecting "disable" in the "International Calls" dropdown. If any of the limits specified in Settings>>Limits international calls are reached then international calls will be disabled. In this case you will see a red box with 'International calls: off' and the reason and time when they were disabled on the home page. You can enable them again by either clicking on the 'Enable' link as seen in the image below or by connecting with telnet to yate and typing 'international on'.

Deleted lines 164-167:


February 22, 2012, at 11:16 PM by monica -
Added line 145:
Added lines 147-154:

You can disable all international/expensive calls by selecting "disable" in the "International Calls" dropdown. If any of the limits specified in Settings>>Limits international calls are reached then international calls will be disabled. In this case you will see a red box with 'International calls: off' and the reason and time when they were disabled on the home page.

http://www.freesentral.com/uploads/Documentation/international_off.jpg


February 22, 2012, at 10:54 PM by monica -
Changed lines 16-19 from:
to:
Added lines 140-145:



International Calls

Freesentral protects your system against attackers trying to make expensive calls. The system counts the number of calls for the specified prefixes and if counters reach the specified limits, calls for those prefixes are disabled. By default all international calls are counted. http://www.freesentral.com/uploads/Documentation/international_calls.jpg

February 22, 2012, at 10:43 PM by monica -
Changed lines 37-38 from:

http://www.freesentral.com/uploads/Screenshots/sip_gateway1.jpg http://www.freesentral.com/uploads/Screenshots/sip_gateway2.jpg

to:

http://www.freesentral.com/uploads/Documentation/sip_gateway1.jpg http://www.freesentral.com/uploads/Documentation/sip_gateway2.jpg

February 22, 2012, at 10:42 PM by monica -
Changed lines 37-38 from:

http://www.freesentral.com/uploads/Screenshots/sip_gateway.jpg

to:

http://www.freesentral.com/uploads/Screenshots/sip_gateway1.jpg http://www.freesentral.com/uploads/Screenshots/sip_gateway2.jpg

March 04, 2010, at 11:55 AM by cristina -
Added line 16:
March 04, 2010, at 11:45 AM by cristina -
Changed line 134 from:

http://www.freesentral.com/uploads/Documentation/system_callerid.jpg

to:

http://www.freesentral.com/uploads/Documentation/System_CallerID.png

March 04, 2010, at 11:33 AM by cristina -
Changed lines 34-35 from:
to:

Adding a SIP gateway with registration

Changed lines 37-38 from:

http://www.freesentral.com/uploads/Documentation/callerid.jpg Adding a SIP gateway with registration

to:
Deleted line 38:
March 01, 2010, at 04:00 PM by cristina -
Changed line 138 from:
to:
February 26, 2010, at 01:05 PM by cristina -
Changed lines 135-138 from:

http://www.freesentral.com/uploads/Documentation/system_callerid.jpg

to:

http://www.freesentral.com/uploads/Documentation/system_callerid.jpg

Configuring

February 02, 2010, at 03:29 PM by cristina -
Changed line 1 from:
to:
February 02, 2010, at 03:07 PM by cristina -
Changed line 48 from:
  • Press Reset to delete the information and rewrite new one.
to:
  • Press Reset to delete the information and write a new one.
Changed line 71 from:
  • Press Reset to delete the information and rewrite new one.
to:
  • Press Reset to delete the information and write a new one.
Changed line 99 from:
  • Press Reset to delete the information and rewrite new one.
to:
  • Press Reset to delete the information and write a new one.
February 02, 2010, at 11:43 AM by cristina -
Changed line 27 from:
  • Select the type of gateway you want to add: with registration/without registration. Choose "with registration" when you know you have an username and a password that yate should be using to autenticate to another server.
to:
  • Select the type of gateway you want to add: with registration/without registration. Choose "with registration" when you know you have an username and a password that Yate should be using to authenticate to another server.
Added line 39:
Changed line 47 from:
  • Press Save to finish the finish the operation.
to:
  • Press Save to finish the operation.
Added line 50:
Changed line 60 from:

To define a dial plan means to make the connection between a call and a gateway. You have the possibility to direct calls of your choice to go to a specified gateway. When a call comes the gateway whose prefix best matched the called number will be used. If more than one gateway are found, they will be ordered by the priority(a higher number means a smaller priority). Freesentral offers fallback routing. A maximum number of 3 routes is selected(this number can be changed from config.php from yate share/scripts). If call fails then the next available route is tried.

to:

To define a dial plan means to make the connection between a call and a gateway. You have the possibility to direct calls of your choice to go to a specified gateway. When a call comes the gateway whose prefix best matched the called number will be used. If more than one gateway is found, they will be ordered by the priority(a higher number means a smaller priority). Freesentral offers fallback routing. A maximum number of 3 routes is selected(this number can be changed from config.php from Yate share/scripts). If call fails then the next available route is tried.

Added line 64:
Added line 73:
Added line 84:
Added line 91:
September 30, 2009, at 02:00 PM by monica -
Added lines 127-128:



September 30, 2009, at 12:40 PM by monica -
Changed line 15 from:
to:
Added line 125:

System's CallerID

September 30, 2009, at 12:39 PM by monica -
Changed line 15 from:
to:
Changed lines 121-126 from:


Nr of digits to cut: 3

to:


Nr of digits to cut: 3

You have the option to set a default caller number and caller name for all calls when making calls to outside your system. This parameters can be set per gateway and they will be used instead of the default one. http://www.freesentral.com/uploads/Documentation/system_callerid.jpg

September 30, 2009, at 12:27 PM by monica -
Added line 36:

http://www.freesentral.com/uploads/Documentation/callerid.jpg

June 02, 2009, at 11:04 AM by monica -
Changed lines 57-58 from:

To define a dial plan means to make the connection between a call and a gateway. You have the possibility to direct calls of your choice to go to a specified gateway.

to:

To define a dial plan means to make the connection between a call and a gateway. You have the possibility to direct calls of your choice to go to a specified gateway. When a call comes the gateway whose prefix best matched the called number will be used. If more than one gateway are found, they will be ordered by the priority(a higher number means a smaller priority). Freesentral offers fallback routing. A maximum number of 3 routes is selected(this number can be changed from config.php from yate share/scripts). If call fails then the next available route is tried.

June 01, 2009, at 05:39 PM by monica -
Changed line 93 from:

http://www.freesentral.com/uploads/Screenshots/edit_dialplan.jpg

to:

http://www.freesentral.com/uploads/Screenshots/modify_number.jpg

June 01, 2009, at 05:38 PM by monica -
Changed lines 96-99 from:

Number: 0744224022 You wish to send the number in international format: +40744334011 You should set : Position to start adding : 1 Digits to add: +4

to:


Number: 0744224022
You wish to send the number in international format: +40744334011
You should set : Position to start adding : 1
Digits to add: +4

Changed lines 102-113 from:

Number: 5550744224011 You wish to send the number in international format: +40744334011 You can achieve this in 2 ways: 1) Position to start replacing: 1 Nr of digits to replace: 3 Digits to replace with: +4 2) Position to start cut: 1 Nr of digits to cut: 3 Position to start add: 1 Digits to add: +4

to:


Number: 5550744224011
You wish to send the number in international format: +40744334011
You can achieve this in 2 ways:
1)
Position to start replacing: 1
Nr of digits to replace: 3
Digits to replace with: +4
2)
Position to start cut: 1
Nr of digits to cut: 3
Position to start add: 1
Digits to add: +4

Changed lines 116-119 from:

Number: 0744224022555 You wish to send the number without the last 555 like this: 0744224022 Position to start cutting: -3 Nr of digits to cut: 3

to:


Number: 0744224022555
You wish to send the number without the last 555 like this: 0744224022
Position to start cutting: -3
Nr of digits to cut: 3

June 01, 2009, at 05:37 PM by monica -
Added lines 92-119:

http://www.freesentral.com/uploads/Screenshots/edit_dialplan.jpg

Example: Number: 0744224022 You wish to send the number in international format: +40744334011 You should set : Position to start adding : 1 Digits to add: +4

Number: 5550744224011 You wish to send the number in international format: +40744334011 You can achieve this in 2 ways: 1) Position to start replacing: 1 Nr of digits to replace: 3 Digits to replace with: +4 2) Position to start cut: 1 Nr of digits to cut: 3 Position to start add: 1 Digits to add: +4

Number: 0744224022555 You wish to send the number without the last 555 like this: 0744224022 Position to start cutting: -3 Nr of digits to cut: 3

June 01, 2009, at 05:33 PM by monica -
Changed line 35 from:

http://www.freesentral.com/uploads/Documentation/sip_gateway.jpg

to:

http://www.freesentral.com/uploads/Screenshots/sip_gateway.jpg

June 01, 2009, at 05:32 PM by monica -
Added line 21:


Changed lines 27-28 from:
  • Select the type of gateway you want to add: with registration/without registration.
  • Select the protocol.
to:
  • Select the type of gateway you want to add: with registration/without registration. Choose "with registration" when you know you have an username and a password that yate should be using to autenticate to another server.
  • Select the protocol. Depending on the type of protocol you select the information to add a gateway will be different.
Added lines 34-36:

http://www.freesentral.com/uploads/Documentation/sip_gateway.jpg Adding a SIP gateway with registration

April 03, 2009, at 05:10 PM by monica -
Added line 5:
April 03, 2009, at 05:09 PM by monica -
Changed line 5 from:
to:
Changed line 9 from:
to:
April 03, 2009, at 04:49 PM by monica -
Changed line 75 from:

to:

April 03, 2009, at 04:48 PM by monica -
Added line 50:


April 03, 2009, at 04:47 PM by monica -
Added line 17:


April 03, 2009, at 04:46 PM by monica -
Changed line 17 from:
to:

Added line 29:

Changed line 39 from:
to:

Changed line 49 from:
to:

Changed line 57 from:
to:

Added line 67:

Changed line 73 from:
to:

April 03, 2009, at 04:44 PM by monica -
Added lines 3-4:



April 03, 2009, at 04:43 PM by monica -
Changed lines 3-11 from:
to:
March 19, 2009, at 04:19 PM by monica -
Added line 1:
March 19, 2009, at 03:53 PM by monica -
Changed line 17 from:
to:

http://www.freesentral.com/uploads/Documentation/add_gateway.jpg

Changed line 54 from:
to:

http://www.freesentral.com/uploads/Documentation/edit_dialplan.jpg

March 19, 2009, at 02:33 PM by monica -
Changed line 1 from:

The Outbound options groups the settings one needs to configure in order to connect the PBX to the outside world.

to:

The Outbound option groups the settings one needs to do in order to connect the PBX to the outside world.

March 19, 2009, at 02:32 PM by monica -
Changed lines 3-4 from:

Gateways

to:

Gateways

Changed line 34 from:

Dial Plan

to:

Dial Plan

March 19, 2009, at 02:32 PM by monica -
Added lines 1-68:

The Outbound options groups the settings one needs to configure in order to connect the PBX to the outside world.

Gateways

A gateway is FreeSentral's connection to another FreeSentral, other PBX or network. It is the address you choose your call to go to.

Add gateway

  • Go to the menu Outbound.
  • Select Add gateway from the submenu.
  • Select the type of gateway you want to add: with registration/without registration.
  • Select the protocol.
  • Fill in the box with the required information.
  • Press Advanced to do advanced configurations.
  • Press Save to finish the operation.
  • Press Reset to delete the information and rewrite new one.

Edit gateway

  • Go to the menu Outbound.
  • Select Gateways from the submenu. Here you have a list of all the gateways you have added so far.
  • Press the edit button associated with the gateway you want to edit.
  • Fill in the box with the required information.
  • Press Advanced to do advanced configurations.
  • Press Save to finish the finish the operation.
  • Press Reset to delete the information and rewrite new one.

Delete gateway

  • Go to the menu Outbound.
  • Select Gateways from the submenu. Here you have a list of all the gateways you have added so far.
  • Press the delete button associated with the gateway you want to delete.

Dial Plan

To define a dial plan means to make the connection between a call and a gateway. You have the possibility to direct calls of your choice to go to a specified gateway.

Add dial plan

  • Go to the menu Outbound.
  • Select Add dial plan from the submenu.
  • Fill in the box with the required information.
  • Press Save to finish the operation.
  • Press Reset to delete the information and rewrite new one.

Edit dial plan

  • Go to the menu Outbound.
  • Select Dial plan from the submenu. Here you have a list of all the dial plans you've added so far.
  • Press the edit button associated with the dial plan you want to edit.
  • Fill in the box with the required information.
  • Press Save to finish the operation.
  • Press Reset to delete the information and rewrite new one.

Delete dial plan

  • Go to the menu Outbound.
  • Select Dial plan from the submenu. Here you have a list of all the dial plans you've added so far.
  • Press the delete button associated with the dial plan you want to delete.

Modify number

  • Go to the menu Outbound.
  • Select Dial plan from the submenu. Here you have a list of all the dial plans you've added so far.
  • Press the modify number button associated with the dial plan.
  • Fill in the box with the required information.
  • Press Save to finish the operation.
  • Press Reset to delete the information and rewrite new one.